Anhui Yuntian Metallurgy Technology Co., Ltd

Why Is The Slag Handling Operation Of The Converter Tapping?

Jan. 07, 2019

Less slag or slag tapping is one of the necessary means to produce pure steel.

Why is the slag removal operation of the converter tapping? Refractory Slide Gate Supplier will tell you the answer today.

As users demand for steel quality is increasing, it is necessary to continuously improve the quality of molten steel. Reducing the amount of slag at the time of converter tapping is an important aspect of improving the quality of molten steel. Effective slag blocking operation in the tapping process of the converter can not only reduce the return of molten steel, improve the yield of the alloy, but also reduce the inclusions in the steel, improve the cleanliness of the molten steel, and reduce the slag of the ladle and extend the service life of the ladle. . At the same time, it can also reduce the consumption of refractory materials, correspondingly improve the service life of the refractory material of the taphole of the converter, and also provide good conditions for refining of molten steel.

Less slag or slag tapping is one of the necessary means to produce pure steel. We are also Ladle Slide Gate Plate Manufacturer, if you don't know anything, you can contact us directly.

Converter Skateboard Blocking Ladle Slide Gate System For Furnace

Copyright © Anhui Yuntian Metallurgy Technology Co., Ltd | Sitemap | Powered by
feroniayang